MERCEDES-BENZ C-CLASS (W204) 2.1 C 220 CDI (170Hp)
- 31152
Your catalogue
First registration date :
Pick a date
2007
2008
2009
2010
2011
2012
2013
2014
I dont know
In order to refine your search, please enter the date your vehicle was put on the road.
Engine Oil MERCEDES-BENZ C-CLASS (W204) 2.1 C 220 CDI (170Hp) 2008 - 2014
33
products found
These types of parts for other models MERCEDES-BENZ C-CLASS (W204) :
- Petrol3.0 C 300 (231Hp)
- Petrol1.8 C 250 CGI (204Hp)
- Diesel3.0 C 350 CDI 4-matic 4x4 (224Hp)
- Diesel3.0 C 350 CDI (224Hp)
- Diesel2.1 C 250 CDI (204Hp)
- Petrol3.5 C 350 CGI (292Hp)
The quantity needed to change the oil in your engine is 6,5 litres.
- Capacity [Litre] 5
- Fluidity 5W40 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards ACEA A3/B4 | RN 0700 / RN 0710 | BMW-LL-01 | PSA B71 2296 | Porsche A40 | VW 501.01 / 502.00 / 505.00 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification GM-LL-B-025 | MB 229.1 / MB 229.3 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 5
- Fluidity 5W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards API SN/CF | ACEA C3 | VW 502.00 / 505.00 | MB 229.31 / 229.51 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification BMW-LL-04 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 5
- Fluidity 5W30 LL (Long Life) The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards ACEA C3 | Fiat 9.55535-S1 | MB 229.31 / 229.51 | GM dexos 2 | VW 504.00 / 507.00 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification BMW-LL-04 | Porsche C30 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 1
- Fluidity 5W40 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards ACEA C3 | API SN/CF | RN 0700 / RN 0710 | MB 229.51 / 229.31 | VW 502.00 / 505.00 / 505.01 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification Ford WSS-M2C 917-A | BMW-LL-04 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 1
- Fluidity 5W40 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards ACEA A3/B4 | RN 0700 / RN 0710 | BMW-LL-01 | PSA B71 2296 | Porsche A40 | VW 501.01 / 502.00 / 505.00 | MB 229.1 / MB 229.3 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification GM-LL-B-025 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 1
- Fluidity 5W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards API SL/CF | ACEA A5/B5 | RN 0700 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification FORD WSS-M2C 913D | Ford WSS-M2C 913-C Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 1
- Fluidity 5W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards ACEA C3 | API SN/CF | VW 502.00 / 505.00 | MB 229.31 / 229.51 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification BMW-LL-04 | Dexos2® Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 1
- Fluidity 5W30 LL (Long Life) The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards ACEA C3 | GM dexos 2 | VW 504.00 / 507.00 | Fiat 9.55535-S1 | MB 229.31 / 229.51 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification BMW-LL-04 | Porsche C30 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 5
- Fluidity 5W30 LL (Long Life) The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards VW 507.00 | ACEA C3 | VW 504.00 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification BMW-LL-04 | Porsche C30 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Product benefits Extends the life of your engine
- Capacity [Litre] 1
- Fluidity 10W40 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards API SL/CF | ACEA A3/B3 | ACEA A3/B4 | RN 0700 | VW 500.00 / VW 501.01 VW 502.00 / VW 505.00 | PSA B71 2294 / PSA B71 2295 | MB 229.1 / MB 229.3 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Oil type Semi-synthétique Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils.
- Capacity [Litre] 5
- Fluidity 5W40 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards RN 0710 | API SN/CF | MB 229.51 | ACEA C3 | RN 0700 | MB 229.31 | VW 505.00 | VW 502.00 | VW 505.01 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification Ford WSS-M2C 917-A | BMW-LL-04 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Product benefits Extends the life of your engine
- Capacity [Litre] 5
- Fluidity 5W30 LL (Long Life) The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards MB 229.51 | ACEA C3 | MB 229.31 | VW 507.00 | VW 504.00 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification BMW-LL-04 | Porsche C30 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Range QUARTZ INEO LONGLIFE
- Replacement of TOT014
- Capacity [Litre] 5
- Manufacturer Release VW 502 00 | VW 505 00 | VW 505 01
- SAE viscosity class 5W-30
- Observe service information
- Replacement of 550021662
- Oil type Synthetic Oil Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Fluidity 5W-30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Packing Type Bottle
- Oil Viscosity Classification SAE 5W-30
- Capacity [Litre] 5
- Manufacturer Release MB 229.31 | MB 229.51 | Porsche C30 | VW 504 00 | VW 507.00
- Specification ACEA Light Duty C3
- Replacement of 15669D
- Range QUARTZ INEO LONGLIFE
- Capacity [Litre] 5
- Fluidity 0W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Specification VW 507.00 | VW 504.00 | Porsche C30 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Standards ACEA C3 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Replacement of 206717
- Fluidity 5W-30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Oil type Synthetic Oil Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Packing Type Bottle
- Oil Viscosity Classification SAE 5W-30
- Capacity [Litre] 5
- Manufacturer Release GM dexos2? supersede | MB 229.31 | MB 229.51 | Renault RN 0700 | Renault RN 0710 | VW 505 00 | VW 505 01
- Specification ACEA Light Duty C3 | API Diesel CF | API Gasoline SN
- Replacement of 157EF0
- Capacity [Litre] 5
- Fluidity 5W30 LL (Long Life) The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards VW 507.00 | ACEA C3 | VW 504.00 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification BMW-LL-04 | Porsche C30 | MB 229.51 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Range EVOLUTION FULLTECH
- Replacement of ELF210
- Capacity [Litre] 5
- Fluidity 5W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards ACEA A5/B5 | API SL/CF Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification RN 0700 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Range Evolution 900
- Replacement of ELF208
- Range QUARTZ INEO LONGLIFE
- Capacity [Litre] 1
- Fluidity 0W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Specification VW 507.00 | VW 504.00 | Porsche C30 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Standards ACEA C3 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Replacement of 212380
- Capacity [Litre] 5
- Fluidity 5W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards VW 502.00 | VW 505.01 | ACEA C3 | API SN/CF Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification MB 229.51 | Dexos2® | BMW-LL-04 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Range EVOLUTION FULLTECH
- Replacement of ELF212
- Capacity [Litre] 5
- Manufacturer Release VW 504 00 | VW 507 00 | Porsche C30
- SAE viscosity class 0W-30
- Observe service information
- Replacement of 550041861
- Capacity [Litre] 5
- Manufacturer Release MB 229.3 | VW 502 00 | VW 505 00 | Renault RN 0700 | Renault RN 0710
- Oil - manufacturer recommendation Fiat 9.55535-M2
- SAE viscosity class 5W-40
- Observe service information
- Replacement of 550040520
- Capacity [Litre] 5
- Fluidity 5W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Standards API SN/CF | ACEA C3 | MB 229.31 | MB 229.51 | VW 502.00 | VW 505.00 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Specification Dexos2® | BMW-LL-04 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Oil type Synthetic Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Range QUARTZ INEO
- Replacement of TOT010
- Capacity [Litre] 5
- Manufacturer Release MB 229.31 | MB 229.51 | BMW Longlife-04
- SAE viscosity class 5W-30
- Observe service information
- Replacement of 550048034
- Fluidity 5W-40 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Oil type Synthetic Oil Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Packing Type Bottle
- Oil Viscosity Classification SAE 5W-40
- Capacity [Litre] 5
- Manufacturer Release BMW Longlife-04 | MB 229.31 | Renault RN 0700 | Renault RN 0710
- Specification ACEA Light Duty C3 | API Gasoline SN
- Range QUARTZ INEO FIRST
- Fluidity 0W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Capacity [Litre] 5
- Specification PSA B71 2312 | STJLR.03.5007 Delivered to producer by the car manufacturer itself, it certifies that the oil is respecting its specifications and so has the required attributes to be used in its engine. If such a recommendation exists, you will find the information on the maintenance book of your vehicle.
- Standards ACEA C1 Classification of the quality of oil delivered by the European Automobile Manufacturers Association (ACEA)
There are 3 different groups (A: petrol engine, B: diesel engine, C: vehicles equipped with particle filter and catalytic converter), each one containing several levels of performance (from 1 to 5).
Be careful, some oils may not be compatible with your engine, so please refer to the directions written on the maintenance book of your vehicle. - Replacement of 183106
- Capacity [Litre] 5
- Manufacturer Release MB 226.5 | MB 229.5 | VW 502 00 | VW 505 00 | BMW Longlife-01 | Chrysler MS 10725 | Chrysler MS 12991 | Porsche A40 | PSA B71 2296 | Renault RN 0700 | Renault RN 0710
- Oil - manufacturer recommendation Fiat 9.55535-N2 | Fiat 9.55535-Z2
- SAE viscosity class 5W-40
- Observe service information
- Replacement of 550041037
- Fluidity 5W-30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Oil type Synthetic Oil Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Packing Type Bottle
- Oil Viscosity Classification SAE 5W-30
- Capacity [Litre] 1
- Manufacturer Release GM dexos2? supersede | MB 229.31 | MB 229.51 | Renault RN 0700 | Renault RN 0710 | VW 505 00 | VW 505 01
- Specification ACEA Light Duty C3 | API Diesel CF | API Gasoline SN
- Capacity [Litre] 1
- Fluidity 5W30 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Replacement of 550021482
Engine Oil EDGE TITANIUM 0W40 - 1 Liter
CASTROL -
Ref: 15B453
- Fluidity 0W-40 The viscosity has 2 grades:
- The cold flow (the numbers before the W of winter): the closer to 0 the number is, the more liquid the oil is at low temperature, which will simplify cold start.
- The performance at high temperature: the higher the number is, the more viscous the oil is at high temperature.
The information about which viscosity to use for your vehicle is available in your maintenance book. - Oil type Synthetic Oil Mineral oil: directly coming from crude oil, this is a cheap solution, often recommended for old vehicles.
Fully synthetic oil: coming from chemical synthesis, the oil goes through several operations to purify it and enrich it with additives for a better engine protection. It is less impacted by extreme temperatures and better keep its properties over time.
Semi synthetic oil: coming from a mix of mineral & fully synthetic oils. - Oil Viscosity Classification SAE 0W-40
- Packing Type Bottle
- Capacity [Litre] 1
- Manufacturer Release GM dexos2? supersede | MB 229.31 | MB 229.51 | Renault RN 0700 | Renault RN 0710
- Specification ACEA Light Duty C3 | API Gasoline SN
- Replacement of 1534A8
- Capacity [Litre] 1
- Manufacturer Release MB 229.51 | BMW Longlife-04
- SAE viscosity class 0W-30
- Observe service information
- Replacement of 550040235
- Capacity [Litre] 1
- Manufacturer Release MB 229.3 | VW 502 00 | VW 505 00 | Renault RN 0700 | Renault RN 0710
- Oil - manufacturer recommendation Fiat 9.55535-M2
- SAE viscosity class 5W-40
- Observe service information
- Replacement of 550040361
Engine Oil HELIX ULTRA PRO AF 5W30 - 1 Liter
SHELL -
Ref: 550046288
- Capacity [Litre] 1
- Manufacturer Release Ford WSS-M2C913-C | Ford WSS-M2C913-D | JLR STJLR.03.5003
- SAE viscosity class 5W-30
- Observe service information
- Replacement of 550040277