FIAT MULTIPLA (186_) 5 doors 1.9 JTD 110 (110Hp)
- 15828
Your catalogue
First registration date :
Pick a date
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
I dont know
In order to refine your search, please enter the date your vehicle was put on the road.
Front shock absorber FIAT MULTIPLA (186_) 1.9 JTD 110 (110Hp) 2001 - 2002
5
products found
These types of parts for other models FIAT MULTIPLA (186_) 5 doors :
- Diesel1.9 JTD (120Hp)
- Petrol1.6 16V Blupower (95Hp)
- Diesel1.9 JTD 115 (115Hp)
- _1.6 16V Bipower (103Hp)
- _1.6 16V Bipower (103Hp)
- _1.6 16V GPL (103Hp)
- _1.6 16V Blupower (95Hp)
- Diesel1.9 JTD 105 (105Hp)
Shock absorber (sold individually)
BOLK -
Ref: BOL-E061066
- Mounting Front Axle
- Fitting Position Passenger side
- Shock Absorber System Twin-Tube There are 2 different systems of shock absorber:
- Mono-tube system: constituted by a single tube and a floating piston to separate oil from gas
- Twin-tube system: constituted by two cavities, they are cheaper and better resist to shocks - Shock Absorber Type Gas Pressure There are 2 different types of shock absorber:
- Gas ones: more expensive, they allow a better roadholding
- Oil ones: cheaper, they are softer and so more comfortable - Compatible with vehicles manufactured until 03/2002 If you don't know it, please refer to the date of first registration, which is usually almost the same. It is available in the zone B of your registration certificate.
Set of 2 shock absorbers
TRW -
Ref: JGM283T
- Connecting Rod Diameter [mm] 22
- Shock Absorber Design Suspension Strut
- Shock Absorber Mounting Type Top pin
- Shock Absorber System Twin-Tube There are 2 different systems of shock absorber:
- Mono-tube system: constituted by a single tube and a floating piston to separate oil from gas
- Twin-tube system: constituted by two cavities, they are cheaper and better resist to shocks - Shock Absorber Type Gas Pressure There are 2 different types of shock absorber:
- Gas ones: more expensive, they allow a better roadholding
- Oil ones: cheaper, they are softer and so more comfortable
Shock absorber (sold individually)
OPEN PARTS -
Ref: SAB8036.31
- Connecting Rod Diameter [mm] 22
- Shock Absorber Design Suspension Strut
- Shock Absorber Mounting Type Bottom Plate
- Shock Absorber System Twin-Tube There are 2 different systems of shock absorber:
- Mono-tube system: constituted by a single tube and a floating piston to separate oil from gas
- Twin-tube system: constituted by two cavities, they are cheaper and better resist to shocks - Shock Absorber Type Gas Pressure There are 2 different types of shock absorber:
- Gas ones: more expensive, they allow a better roadholding
- Oil ones: cheaper, they are softer and so more comfortable
Shock absorber (sold individually)
KYB -
Ref: 334863
- Shock Absorber Design Suspension Strut
- Shock Absorber Mounting Type Top pin
- Shock Absorber System Twin-Tube There are 2 different systems of shock absorber:
- Mono-tube system: constituted by a single tube and a floating piston to separate oil from gas
- Twin-tube system: constituted by two cavities, they are cheaper and better resist to shocks - Shock Absorber Type Gas Pressure There are 2 different types of shock absorber:
- Gas ones: more expensive, they allow a better roadholding
- Oil ones: cheaper, they are softer and so more comfortable
Shock absorber (sold individually)
QUINTON HAZELL -
Ref: QAG181205
- Mounting Front Axle
- Shock Absorber Design Suspension Strut
- Shock Absorber Mounting Type Top pin
- Shock Absorber System Twin-Tube There are 2 different systems of shock absorber:
- Mono-tube system: constituted by a single tube and a floating piston to separate oil from gas
- Twin-tube system: constituted by two cavities, they are cheaper and better resist to shocks - Shock Absorber Type Gas Pressure There are 2 different types of shock absorber:
- Gas ones: more expensive, they allow a better roadholding
- Oil ones: cheaper, they are softer and so more comfortable